Click on Utilities PANS OPS and select PBN, and the WIZARD appears.  

​

You have to complete 2 wizards and then click on workspace what output tell you, it depends on SID, STAR or Miss Approach.

Example SID PBN: GNSS, RNAV1_2, with different segments, also with change of specification at 15NM and 30NM.

​

​

​

​

​

Example SID PBN: GNSS, RNAV1_2, with different segments, including RF, and of course you can analyze RF segments in the last version.

​

​

​

​

​

Example SID PBN: GNSS, RNAV1_2, with different segments, also with change of specification at 15NM and 30NM.

​

​

​

​

​

Example MISSED PBN with OAS:

Turn at altitude in the Second Point, Direct to Fix to last point: User can see areas opened from DD of OAS.

​

​

​

​

​

You get available for obstacle analysis the following:

​

SID INIT SEGMENT

MISS APPROACH INIT SEGMENT

​

TNA SID, MISSED APPROACH

TP SID, MISSED APPROACH

​

STAR segment on PANS OPS MAIN AREAS.

It takes less than 2 minutes to analyze 200 m size cell from DEM (2,000,000 points) or

up to 10 minutes for 05 m size cell from DME (80,000,000 points)

​

You get the critical obstacle with a red circle (in layer criticalObstacles) in the drawing and also get the main data in output.

Also you get in the file of the analysis of the first 5000 or 10000 critical obstacle. Now XLS available.

SID

PDG is calculated for SID init, TNA, TP segment. Order by PDG.

Missed Approach

​

OCA for Missed Approach Init Segment is calculated.

slope is calculated in Missed Approach TP, TNA order by difference btw TNA/TP altitude - obstacle altitude - MOC

In AirNavCAD we are improving always so we are starting to give the output for the PBN SID in AIXM 5.1 or 5.1.1 and you can see it in a viewer of AIXM.

​

​

As any area you can export that area to KML.

​

The nominal TRACK gets altitude, so you can see in kml.

​